§ 136 Stamp

  1. The stamp authorized for use by architects by section 5536.1 of the code may be purchased from any source. It shall be circular in shape and shall be not less than one (1) inch in diameter and not more than two (2) inches in diameter. The stamp shall be of a design similar to those shown below and shall bear at minimum those elements specified in section 5536.1(b) of the Code.
  2. The stamp shall not be of the embossing type.
  3. The license renewal date shall be shown on the stamp by either leaving a space on the stamp where the architect shall write his or her renewal date or having the license renewal date printed on the stamp.

    *REN. Refers to Renewal Date